Don’t Panic! Here’s How to Fix the Blue Screen of Death (BSOD) in Windows

There are solutions to help you recover from a BSOD, which can be brought on by either hardware or software. In this article, you’ll get to know how to fix the Blue Screen of Death (BSOD) in Windows whether it’s caused by software or hardware.

The Blue Screen of Death and What Causes It

A STOP Error, often known as a Blue Screen of Death (BSOD), occurs when a problem is so damaging that Windows must stop running. The majority will display a STOP code to help you identify the underlying cause; it is typically hardware- or driver-related.

You must turn off the setting for “automatic restart on system failure” if the blue screen displays and your machine restarts itself. 

The universal Blue Screen of Death troubleshooting steps are listed below.

Simple Ways to Fix a Blue Screen of Death

• What did you do right before the equipment stopped operating? You might want to ask yourself

Maybe you recently updated a driver, or put in a Windows update? Probably you installed a new piece of software or hardware? If you did any of these, there is a strong likelihood that the changes you made to your device was what led to the BSOD.

If this is the case, you should Revert your change and check for the STOP Error once more. About what was altered, potential solutions include, using the Windows Systems Restore, returning the device driver to a previous version before your driver update, or Using Last Known Good Configuration to start Windows which will roll back recent driver and registry modifications.

• Check your device for viruses and malware.

A Blue Screen of Death can be brought on by some viruses, particularly those that attack the boot sector or master boot record (MBR).

Ensure that the MBR and boot sector scanning options are enabled and that your virus scanning program is fully up to date.

• Check and confirm that there’s enough free hard drive space for Windows Installation

If your primary section doesn’t have enough free space, you could get Blue Screens of Death and other major problems including data corruption.

According to Microsoft, you keep at least 100 MB of free space, however, you’ll frequently run into issues with so little free space. Windows users are often advised to keep at least 10% of a drive’s capacity free at all times.

• Search for and install all Windows service packs and updates that are available.

Microsoft periodically releases updates and service packs for their operating systems, some of which may include fixes for the problems that led to your BSOD.

• Ensure to update hardware drivers in Windows

Updated drivers may be able to resolve the STOP error’s root cause since hardware or drivers are typically the source of Blue Screens of Death.

• Reset the BIOS to its default configurations.

BSODs and other inexplicable problems can be brought on by an improperly suited or overclocked BIOS.

Try reverting the clock speed, voltage settings, and BIOS memory options to their original values and seeing if it fixes the STOP issue if you’ve customized your BIOS settings extensively and don’t want to load the default ones.

• Check properly to see if there maybe problems or warnings in the System and Application logs in Event Viewer.

This may provide you with further information about the BSOD’s root cause. Administrative Tools allows you to access Event Viewer.

• Under Device Manager, reset the hardware’s settings to default.

The system capabilities that each unit of hardware is set up to consume in Device Manager should be left at default unless you have a specific cause to change them. 

A Blue Screen of Death has been observed to occur when hardware settings are different from default.

• Inspect the installation and location of all internal wires, cards, and other parts.

Try reinstalling the following hardware, then check for the STOP warning once more. A Blue Screen of Death might be caused by hardware that has not been installed correctly.

• Run diagnostic tests on your computer’s hardware

Any given Blue Screen of Death is almost certainly caused by a malfunctioning piece of hardware. If a test fails, change your RAM or hard disc in your computer immediately.

• Update your BIOS

A Blue Screen of Death could occasionally be brought on by an older BIOS due to certain discrepancies.

• Using only the most basic hardware, start your computer.

Starting your computer with the very minimum of hardware required to run the operating system is a helpful troubleshooting step in many circumstances, including BSOD problems. The fact that one of the removed hardware components was the root of the STOP notice is demonstrated if your machine boots up without difficulty.

Other Alternatives In case you haven’t corrected the cause of the BSOD yet

When Software Is Likely the Culprit of the BSOD

If you still believe that the Blue Screen of Death is the result of faulty software, here are some possible solutions:

• Search for any program updates, then install them.

To check for updates in most software programmes, navigate the menu until you find the option that says “Check for Updates.”

• Reinstall the software

If updating doesn’t work or isn’t an option, just remove the programme and reinstall a brand-new copy of it.

• Try a different approach.

Using a different but comparable program can be your last option if there is just no way to make this program operate (and uninstalling it demonstrates that this program is the source of the BSOD).

• Contact the developer.

It’s conceivable that the program developer has already addressed a specific resolution to this specific BSOD.

When Hardware Is Likely the Culprit of the BSOD

If you still believe that the Blue Screen of Death is the result of faulty hardware, here are some possible solutions:

• Check to see if the hardware is compatible with Windows.

Even though it’s unlikely, the hardware and your particular version of Windows may be incompatible.

• Firmware updates for the hardware may be necessary

If there is the firmware (hardware’s equivalent of software) available, updating it is a good idea, much as you may update software to remedy a problem it’s having with Windows.

• Obtain new hardware.

The hardware itself probably needs to be replaced if it isn’t functioning properly. If this piece of hardware was the sole one causing the BSOD, it should stop occurring once you take these steps.

• Contact the developer for support

They might know their understanding of the subject of this problem which could be helpful.

Conclusion

It’s possible to fix your computer if you experiencing the Blue Screen of Death (BSoD) in Windows. Simply follow the solutions we’ve listed above and see if it works. Should Al the solutions we’ve listed fail, we recommend contacting the developer for more support. They’ve most likely already had countless complaints about the issue and may be able to help.