Is your phone waterproof? Hopefully, it is but in case it isn’t, that means water can easily seep inside open ports, especially the phone speaker. Water can enter while it’s raining or if you accidentally drop it in water. When this occurs, it has the potential to destroy the phone if ignored or make it start to act out. Although more recent iPhones and Android devices are water-resistant, they lack a tool or other method to get out water should it get into your phone.
In this case, there is an app that may assist you in removing water from your phone easily.
It only takes a few seconds to remove water from any smartphone using the Sonic app, which uses high-frequency sound to remove water from the device.
The Sonic App’s Operating System
The app’s operating system is quite straightforward to use; it creates a very high-frequency sound that can be manually adjusted to remove water from your phone utilizing vibrations when a speaker tries to produce sound or music.
The sound wave is so forceful that it pushes moisture that has been trapped inside the phone through the phone speaker.
How Can You Remove Water From Your Phone?
Step one is to download and install the Sonic App
First, you must download the Sonic app on your iPhone via the App Store. It’s the only way you’ll be able to use it.
Alternatively, you can look up Sonic V in the Apple App Store’s search bar. On the other hand, if you use an Android device, head to the Google Play Store and type “Sound Wave Tone Generator” into the search bar.
Input password
Your phone’s settings may require you to enter your Apple ID and password to proceed. Android phones and tablets do not need this.
Next, Set the Sound Frequency
A high-frequency sound should be played considering the vibration increases with sound volume. This will also quickly get trapped water out of your phone.
You only need to use the app to change the sound frequency. You may create a sound tone using Sonic V at 165 kHz, the perfect frequency to evacuate water from your phone.
Additionally, your smartphone’s type will have a major impact on how this process goes. After adjusting the frequency, press the “Play” button to start the sound.
Turn up the volume
The fastest way to eject/remove water from your phone speakers is to turn up your phone’s volume to its maximum. You can be confident that when there are no water or dust specks in the area, your phone’s speaker should start to sound less distorted and return to working as intended.
Press STOP
Press “Stop” to finish the process after you feel that your phone speaker is functioning normally. Finally, remove any extra water from the speaker grill using a dry cotton cloth.
This should be enough however, you can also use the app’s automated setting technique to retry the process if you are not impressed by the steps listed above.
Between 4500 and 1079 Hz are the frequencies needed to remove water from your phone. Hold the water droplet icon in the app’s lower right corner to carry out it. You can remove the finger to silence the sound when you’re impressed.
The surplus water from the speaker grills can then be removed using a clean, absorbent cloth.
Conclusion
This one is the easiest way to remove water that’s trapped inside your smartphone. Please remember that only smartphones with water resistance ratings will be able to use the Sonic app. Speaker damage will occur if you test out on a phone without a rating. Make sure to check out the waterproof rating for your phone online before continuing.
